I have been following you in learning autocad. For this example, I will use a DWG file but you can use the same method for PDF file and Images. The drawings are then plotted or printed at a plot "scale" that accurately resizes the model objects to fit on paper at a given scale such as 1/8" = 1'. It’s also possible to scale the entire drawing by Reference, not only individual objects. To Change the Drawing Scale (AutoCAD Mechanical) Products and versions covered . To use the SCALE command adding the reference to the equation Type SCALE and Press ENTER Select the object to scale and Press ENTER Specify the base point (Let’s it … LEARN MORE BUT I HAVE A QUESTION. So, this was all about using scale option in different tools and features of AutoCAD. 1:20, 1:50 or 1:100 (SI-units) or. Just make sure that while creating the block you keep “Scale Uniformly” box unchecked as shown in the image here. Planned Updates. Scale drawings show an image either reduced or enlarged in size. RSS. Support and FAQ In this case type 17 and press enter again. To change it to Architectural type UN press enter and then select Architectural from Length drop-down as shown in the image here. Click on the top left corner of the image as the base point and then select the reference option from the command line. Then select the entire AutoCad drawing and press the space bar. Delete ALL “drawing scales”, I couldn’t figure out if there is a way to delete all “drawing scales” (attached) in one go. Now you need to select the base point. It has been very helpful. In the Scale box, enter a new scale ; Click OK until all dialog boxes close. 1/4" or 1/8" (Imperial units, US) scales. Here I will attach an image of the floor plan to explain it. Now click at a point close to the top left of the layout well within plotter margin and then click at another point to make a rectangular viewport. I have one question in mind about scaling. To explain scale command I will use this simple window block which has the size of 10 unit along the X-axis and 15 units along Y-axis. Thanks. Similarly, scale factor greater than 1 will increase the size of the drawing. Currently, the scale of drawing inside the viewport is automatically set by AutoCAD but you can change it manually. Is there’s a way that you can scale an element with different x and y values? There are two methods to resize and re-scale. I am Autodesk AutoCAD Certified Professional and an Autodesk expert elite member. In a similar way, you can change the scale of attached images and PDF files. Scale bars allow us to accurately determine the size of objects (width, height, length, depth) of space, buildings, structures, parts in CAD projects and drawings. In this case, I have used Architectural units so make sure you change the unit to architectural before using scale option in this example. I am a mechanical engineer and I have worked with Design, Manufacturing and Training industries but now SourceCAD is my full-time work and I use it to train students all over the world. Select the desired object. AutoCAD Scale Factors Charts Here are some simple charts to help you convert drawing scale to scale factor, for working in CAD Convert your PDF to AutoCAD Architectural Scales Engineering Scales DRAWING SCALE SCALE FACTOR VIEWPORT SCALE 1″ = 10′-0″ 120 1/120xp 1″ = 20′-0″ 240 1/240xp 1″ = 30′-0″ 360 1/360xp 1″ = 40′-0″Continue reading → Autodesk AutoCAD tutorial for beginner user how to use scale into objects, check it out!! The property palette will open up, scroll down in the palette and change the scale from the geometry tab of the property palette. Become Affiliate Its always a good idea to use those options if you don’t know the scale factor when scaling objects. After making all the viewports your layout space should look like this. See also How to create Non-Rectangular Viewports Your monitor can display selected areas of your model at any magnification on-screen without changing the actual model size. To Change the Scale of the drawing in AutoCad: At the Command prompt, enter AMOPTIONS. Xrefs or external references are entities like DWG files, PDF or images that can be inserted in a drawing as a reference.